Kodak DC3400Kodak updates the popular DC280 with a new sensor, lower power consumption, and a new color scheme...<<Shutter Lag & Cycle Time Tests :(Previous) | (Next): Camera Modes & Menus>> Page 8:Operation & User InterfaceReview First Posted: 10/5/2000 |
Operation and User Interface
As mentioned in our "Executive Overview", we found the user interface for the DC3400 to be very easy to navigate. On first usage, it took us less than 5 minutes to get a handle on the major control functions of the camera by just experimenting with the different dials and buttons. Reading the manual really wasn't even necessary.
The camera operates in one of four different mode settings: Capture, Review, Connect, and Camera Setup You select which mode you want with the Mode Dial on the rear of the camera. Depending on which mode you select, pressing the menu button-also on the rear of the camera-displays a sequence of menu options that are specific to that mode. Easy-to-access up/down and left/right scroll buttons to the right and below the LCD screen are used to scroll through the different menus and options, while a blue button Kodak calls the "DO-IT" button is used to confirm selections.
The LCD doesn't automatically turn on when in Capture mode. You need to turn it on manually using the DO-IT button. This is mildly annoying if you tend to use the LCD a lot, but does much to conserve battery life. In comparison, the LCD is always on in Review mode and you don't need to enable it. If you need to adjust the LCD brightness, simply use the small thumb wheel on the bottom of the camera. The LCD shuts itself off after 30 seconds of inactivity to save battery power.
While in Capture mode, available menu options include exposure compensation, borders for images, special effect settings, quality and resolution settings, date and time stamp, and white balance and meter mode settings.
Similarly, Review mode provides a variety of options relating to images already captured and stored to the camera's picture card, including deleting, setting print order, "locking" and image, setting slide show timing, and retrieving detailed picture information.
Connect mode lets you connect the camera to a PC or Macintosh computer using the USB or serial cables packaged in the camera box. You can connect to Windows '95 or '98 computers, as well as USB-equipped Apple Macintosh computers. Of course, you first need to install the DC3400's software on your computer before you can acquire images from the camera.
Other control buttons are placed very similarly to other cameras. On the top of the camera, you'll find the Status Display which shows icons for the different camera settings, if the settings are enabled. It's an easy reminder of which menu options you have enabled, the battery power status, and pictures remaining on the picture card, among other things. Also easily accessed atop the camera are the Shutter Button, Zoom Control for telephoto or wide angle shooting, Self-Timer Button, Infinity Focus/Close-up Button, and lastly, the Flash Button to change flash settings for different exposures.
Control Enumeration
Self-Timer Mode
The Self-Timer mode has its own button on the top of the camera. You can use the self-timer in conjunction with any of the camera settings you've enabled, like many other camera models. Depressing the Self-Timer button provides a 10 second delay between pressing the Shutter button and the when the camera fires.
Infinity Focus/Close-up Button
Also located atop the camera, this button toggles between two modes:
- Close-Up: Disables the zoom capabilities of the camera and sets the focus distance to between 0.8 to 1.6 feet. In Close-up mode, the LCD is automatically turned on to help you frame your image, since the optical viewfinder won't be as accurate.
- Infinity: Turns off the flash and auto-focus and sets the lens' focus to infinity to provide sharp, clear images of landscapes and other distant subjects.
Follow Imaging Resource: