Panasonic Lumix DMC-FZ3By: Dave Etchells(none) <<Optics :(Previous) | (Next): Shutter Lag & Cycle Time Tests>> Page 6:Exposure & FlashReview First Posted: 11/03/2004 |
Learn about white balance and simple lighting techniques for dramatic shots in out free Photo Lessons area!
The Lumix DMC-FZ3 offers excellent exposure control, with Program AE
(P), Shutter Speed Priority AE (S), Aperture Priority AE (A), Manual (M) exposure
modes, and a handful of special settings for specific shooting situations. The
Program AE mode controls shutter speed and aperture settings, but also provides
access to other exposure controls including Exposure Compensation, Flash Exposure
Compensation, Spot Metering, ISO adjustment, AE lock, Auto Exposure Bracketing,
White Balance, Contrast, Sharpness, and Saturation, among others. Halfway pressing
the Shutter button displays the selected aperture and shutter speed settings.
You can shift the exposure by pressing the Exposure button, then using the left
and right arrow keys to cycle through equivalent exposure combinations,
biasing the exposure toward more or less depth of field.
Free Photo Lessons
Shutter Priority mode puts you in control of the shutter speed setting (from 1/2,000 to eight seconds), while the camera chooses a corresponding lens aperture. As with the Program AE mode, you maintain control over all other exposure options. Aperture Priority works along similar lines, except that you control the aperture (f/2.8 to f/8.0) and the camera chooses the best corresponding shutter speed. Both the shutter speed and aperture values are displayed on the LCD monitor. If the camera can't find an aperture or shutter speed to produce the correct exposure with the shutter speed or aperture you've selected, the LCD indicators will turn red, letting you know that you need to change the setting you selected.
Full Manual exposure mode lets you control both shutter speed and lens aperture independently. Pressing the Exposure button switches the four-way rocker control arrow keys from their normal functions to control aperture (the up/down arrows) and shutter speed (the left/right arrows). A nice touch is that tapping the shutter button calls up an exposure-meter display on the LCD screen, showing the currently selected exposure level, across a range of +/- 2 EV. The exposure-meter display disappears after a few seconds of inactivity, or you can use the Display button to select a display mode without the on-screen information overlay.
A number of preset "scene" exposure modes are also available for shooting under special conditions, and include Portrait, Sports, Scenery, Night Scenery, Night Portrait, Panning, Fireworks, Party, and Snow modes. These modes preset a variety of camera options, helping novice photographers capture good-looking pictures in challenging situations without requiring a full knowledge of the camera. The Scene modes are accessed through the "SCN" option on the Mode Dial. Through the Setup menu, you can set the camera to automatically display the Scene menu when entering this mode, or set it so that the previously selected scene is enabled whenever switching to the modes.
Portrait mode uses a large aperture setting to reduce depth of field, resulting in blurred backgrounds and strong focal emphasis on the primary subject. Sports mode instead utilizes fast shutter speeds and wider apertures, in effect "freezing" fast-paced action. Scenery mode is for capturing wide landscapes, and places focus on a distant subject.
Night Scenery mode uses a slow shutter speed to capture the color and detail of evening settings without using the flash. Because of the slow exposure, a tripod is recommended. Night Portrait mode works in the same manner, but utilizes the flash to illuminate the primary subject in the foreground. By using a slow shutter speed and the flash together, the overall scene is more evenly exposed. (The flash mode is fixed at Slow-Sync with Red-Eye Reduction. Portrait subjects should be warned to stay still after the flash, until the shutter is closed.)
Panning mode is useful for following a moving subject, such as a person on a bicycle or in a slow-moving vehicle, so that the subject stays in focus while the background becomes a blur. When shooting in Panning mode, hold down the Shutter button while moving the camera to follow the subject. (Just make sure that the subject is moving at a speed you can easily follow without blurring.) Fireworks mode preserves the color and pattern of fireworks by using a slow shutter speed to capture the full effect (a tripod is recommended). Party mode is best for taking pictures under dim indoor lighting with a flash. You can select between Forced Red-Eye Reduction and Slow-Sync Red-Eye Reduction modes, and a tripod is recommended. Finally, Snow mode captures good exposures in bright, snowy conditions, and adjusts the white balance and exposure to enhance the white color and detail of the snow.
Exposure compensation can be adjusted from –2 to +2 exposure values (EV), in one-third-step increments. The camera's metering system offers three operating modes, which include Multiple, Center-Weighted, and Spot, selectable through the Record menu. Multiple metering measures brightness throughout the entire frame, and determines the best overall exposure. Center-weighted averaging is based on an averaged light reading of the overall scene, but places more emphasis on the center of the viewfinder or LCD monitor. Spot metering reads only a specific point in the viewfinder. You can lock the exposure (and focus) by halfway pressing and holding the Shutter button, and then reframing the subject.
The DMC-FZ3 offers six White Balance modes, including Auto, Daylight, Cloudy, Halogen, Flash, and White Set. The White Set mode allows you to manually set the white balance by holding a white card in front of the camera to set the value in the setup mode. You can fine-tune the white balance by adding more red or blue to the color balance in all of the modes except Auto, using the WB Adjust feature (accessed by pressing the up arrow of the Multicontroller until WB Adjust appears on the LCD monitor).
ISO film speed equivalents on the DMC-FZ3 are set in the Record menu, with choices of Auto, 80, 100, 200, and 400. The higher the ISO setting, the more you can extend the camera's exposure range in low-light situations. Just keep in mind that higher ISO values have progressively lower quality levels, with increased image noise. On that note, the DMC-FZ3 does feature long-exposure Noise Reduction, which uses dark frame subtraction to reduce the amount of image noise in longer exposures. What this means is that after the initial exposure, the camera takes a second exposure with the shutter closed, and compares the two images to subtract the noise pixels from the main image.
The DMC-FZ3 also offers a Color Effect setting with Cool, Warm, Black and White, and Sepia color options. A Picture Adjustment menu option features an additional adjustment tool, with options somewhat deceptively labeled as "Natural," "Standard," and "Vivid." What's wrong with that? - These options actually affect the amount of in-camera sharpening applied to the Z3's images, rather than color saturation, as you'd more likely expect.
Auto Exposure Bracketing
The Auto Exposure Bracketing mode is accessed by pressing the up arrow of the
Multicontroller until "Auto Bracket" appears on the LCD monitor. It
automatically captures a series of three images, each at a different exposure
setting. You can manually set the exposure variation between shots in one-third-step
increments, up to as much as +/- 1 EV. The camera makes all three exposures
in rapid succession with just one press of the Shutter button. Unfortunately,
this function cannot be used with flash photography. If the flash fires, only
one image will be recorded. (The likely reason for this is that the onboard
flash recharges too slowly to be usable in a multiple-exposure application like
this.)
Burst Shooting
The DMC-FZ3 has three Burst shooting modes, which are accessed by pressing the
Burst button on the top panel. Low Speed mode captures a maximum of 7 consecutive
frames at a bit over two frames per second, while High Speed mode captures a
maximum of 7 images at about 3.75 frames per second, as long as you hold down
the shutter release. (Burst length will depend on the subject you're shooting,
and how well the resulting images compress. In my testing, using a standard
noise pattern for worst-case compressibility, I found a maximum burst length
of seven frames.) There's also an Infinity mode, which limits the number of
images only by memory card capacity, and shoots at approximately two frames
per second. (Interestingly, I found that the frame rate in "infinity"
mode was actually a little higher than in "Hi" mode.) The number of
images and actual shot-to-shot speed depend on several factors, including the
amount of memory remaining on the flash card and the size/quality of the images
being acquired. While the higher-end FZ15 required a 32x memory card to shoot
non-stop in Infinity mode, the lower-resolution FZ3 was able to shoot without
pausing with a non-speed-rated Lexar SD card.
Movie Mode
The DMC-FZ3 also offers a Movie mode, which is accessed by turning the Mode
dial on top of the camera to the miniature film frame symbol. The Motion JPEG
files are recorded at 320 x 240 pixels, at either 30 or 10 frames per second.
Recording times are limited by frame rate and memory card capacity. Recording
stops and starts with a full press of the shutter button, and the amount of
available recording time appears in the upper right corner of the LCD monitor.
While the lens can be zoomed before and after movie recording, it cannot be
activated during the recording process itself, and the camera's exposure is
also set and fixed at the beginning of the recording interval. Movies are recorded
with sound. As with its "INF" continuous shooting mode, the FZ3's
Movie mode appears capable of recording movies continuously to the limit of
card capacity, even on slower memory cards. (At least it worked fine with a
non-speed-rated Lexar SD card.)
Flip Animation Mode
This mode, enabled through the Record menu, lets you connect a string of images
together to make a 20-second movie that resembles a flip animation. You can
record as many as 100 consecutive images to create the animation. To capture
the series, select "Image Capture" under the Flip Animation menu option,
then snap away. Once you've captured all of the files you need, select "Create
Motion Image" and select the frame rate (either five or ten frames per
second) to string the images together into a motion file. Once the animation
has been created, you can opt to delete the still images to save memory space.
(This can be a fun mode. Sony had a Flip Animation option on their cameras a
couple of years back, but that feature was limited to a much shorter sequence
of images.)
Self-Timer Mode
The Self-Timer is set by pressing the left arrow key on the Multicontroller,
and offers a choice between a two- or 10-second countdown. When set to Self-Timer,
the camera displays the standard self-timer icon (a clock counting down) in
the LCD display, and depressing the Shutter button activates the countdown,
during which a lamp on the camera's front panel blinks. The two-second option
is very handy when you're shooting long exposures with the camera on a tripod,
and want to avoid jiggling the camera and blurring the shot when you press the
Shutter button with your finger. The two-second countdown is enough time for
any vibrations to die down before the shutter opens, but not so long as to seriously
slow your shooting. - I also find myself using a short self-timer for shots
in low light or macro situations, where I just prop the camera on a convenient
rock, fence post, or water glass (at a restaurant, for example) to avoid hand-held
jiggles. Very convenient, when you don't happen to have a tripod along.
Flash
The
DMC-FZ3's built-in, pop-up flash operates in one of six modes: Auto, Red-Eye
Reduction (Auto), Forced, Red-Eye Reduction (Forced), Slow-Sync (with Red-Eye
Reduction), and Flash Off. The Auto mode tells the camera to determine when
flash is necessary, based on existing exposure conditions. Forced means that
the flash fires with every exposure, regardless of lighting conditions, and
Flash Off completely disables the flash. The three Red-Eye Reduction modes fire
a small pre-flash one second before the full flash, to reduce the redeye effect
in portraits. Slow-Sync mode combines the flash with a slower shutter speed,
letting more of the ambient light fall on the camera's sensor, brightening background
objects.
The flash exposure can be adjusted from -2 to +2 EV in one-third-step increments by pressing the up arrow of the Multicontroller until the Flash Exposure Compensation adjustment appears. Panasonic rates the DMC-FZ3's flash as effective from 0.98 to 15 feet (30 centimeters to 4.6 meters) depending on the zoom setting and ISO. In my own tests, the camera's flash just started to fall off at the 14 foot limit of my test, at ISO 80, and with the lens towards the telephoto end of its range. - Good range, but not startlingly so. Given the extent of its other "enthusiast" features, I was a little surprised to not see a sync connector on the FZ3, for use with an external flash unit. - For that capability, you'll have to go to the higher-end (and higher resolution) FZ20 model, which sports a hot shoe.
Reader Comments! --> Visit our discussion forum for the Panasonic Lumix DMC-FZ3!
Follow Imaging Resource: