Canon PowerShot G5The next generation of Canon's popular "G" model updates the line with a larger, 5.0-megapixel CCD.<<Shutter Lag & Cycle Time Tests :(Previous) | (Next): Camera Modes & Menus>> Page 8:Operation & User InterfaceReview First Posted: 08/18/2003 |
Operation and User Interface
Like its predecessors, the G2 and G3 models, the Canon G5's combination of control buttons and dials may seem a little complicated at first glance. However, once I became familiar with the features, I actually found the user interface to be very intuitive. I generally prefer to change as many exposure settings as possible through external controls, without resorting to the LCD menu, and the G5 does pretty well in this regard. Better yet, the G5's organization of multiple functions under the FUNC button's menus and the multiple functions of the Main dial make for very fluid camera control. The camera controls are somewhat spread out, but it's possible to operate the camera one-handed and still access the majority of the buttons.
I appreciate the small status display panel on top of the camera, which allows you to check current camera settings without having to activate the LCD monitor (a nice battery conservation feature). I also enjoyed shooting with the rotating LCD screen, which makes composing shots from odd angles a lot easier to manage. The ability to flip the monitor all the way around to face the back panel was great for keeping fingerprints and smudges off of the screen when handling the camera.
Control Enumeration
Shutter Button: Sloping downward to the right on the camera's top panel,
this button sets focus and exposure when halfway pressed, and fires the shutter
when fully pressed. (It looks a little odd, but I really like the angled Shutter
button. It fits your finger better than the traditional flat-mounted design.)
Zoom Lever: Surrounding the Shutter button and also sloping slightly, this lever controls the optical and digital zoom in any record mode. In Playback mode, this lever controls the digital enlargement of recorded images.
Mode Dial: Directly behind the Shutter button and Zoom lever on the camera's
top panel, this notched dial controls the camera's exposure mode. The following
options are available:
- Movie: Records short movie clips with sound, with a maximum recording time of three minutes (depending on resolution and the amount of available space on the memory card).
- Stitch-Assist: Captures as many as 26 consecutive images to make up a single panoramic shot. Images are "stitched" together on a computer later, using the software provided by Canon.
- Night Scene: Optimizes the camera for night shots, using a slower shutter speed to allow more ambient light into the image.
- Landscape: This mode is best for wide shots of scenery. Focus is fixed at infinity and the camera uses a smaller lens aperture so more of the scene will be in focus.
- Portrait: Employs a larger aperture setting to decrease the depth of field, leaving the primary subject in sharp focus and the background slightly blurred.
- Auto: Places all exposure variables and choices under automatic control. Only limited controls are available to the user, including file size, compression, flash mode, and zoom.
- Program AE: All exposure options are adjustable by the user, with the exception of shutter speed and aperture.
- Tv (Time Value, or Shutter Priority): Allows the user to select the shutter speed setting, while the camera picks the best lens aperture.
- Av (Aperture Value, or Aperture Priority): The opposite of Shutter Priority mode, the user selects the lens aperture, while the camera chooses the shutter speed.
- Manual: All exposure variables are available to the user, including both shutter speed and aperture.
- C1 and C2: These are Custom modes, with multiple exposure settings designated by the user and remembered by the camera. Once set, you can recall the complete camera setup with a twist of the Mode dial. (Very handy when switching back and forth between very different shooting situations. (For instance, outdoors and indoors at a party or reception.)
Power Switch and Button: This lever and button combination controls both
the camera's power and mode. Located to the left of the Mode dial, the lever
portion features a small button on the front, which allows it to turn when pressed.
Turning the lever to the left activates Record mode and powers on the camera,
while turning it to the right enables Playback mode. In the center of the lever
is the Off button, which powers the camera off.
Drive Mode Button: In front of the Power Switch and Off button, this button
cycles through the camera's available drive settings. Choices are Single, Continuous,
High Speed Continuous, and Self-Timer/Remote Control modes.
Main Dial: Directly below the Shutter button, on the top of the handgrip,
this dial controls a variety of camera settings. It adjusts aperture or shutter
speed depending on the exposure mode, sets any menu setting in the Function
menu, sets White Balance and Exposure Compensation options, and controls the
manual focus setting. In Playback mode, this dial scrolls back and forth through
captured images.
Lens Ring Release Button: Hidden beneath the lens in the lower left corner
of the front panel, this button releases the lens ring so that it can be removed.
Removing the ring allows you to connect accessory lens adapters to the G5.
Four-Way Arrow Pad (Omni Selector): Dominating the top right corner of the
camera's back panel, this rocker button features an arrow in each direction.
In any settings menu, these arrows navigate through menu options. In most Record
modes, the up arrow activates the Exposure Compensation menu, at the bottom
of the LCD display. Pressing the down arrow enables the White Balance menu.
In Playback mode, the right and left arrow keys scroll through captured images.
Menu Button: Directly below the Four-Way Arrow pad, this button displays
the settings menu in any camera mode. It also dismisses the menu display.
Set Button: To the left of the Menu button, this button confirms menu selections.
In still-picture Record mode, this button lets you change the AF area. After
pressing the button, the AF indicator frame turns green, and can be moved throughout
the frame with the arrow keys. Additionally, this button accesses secondary
settings in the Resolution, Effects, and Bracketing menus.
MF / Sound Button: Tucked on the right side of the optical viewfinder eyepiece,
this button switches the camera between auto and manual focus control. In Playback
mode, this button enables sound recording, for short sound clips to accompany
images.
AE / FE Lock (*) / Erase Button: The top button in a series lining the right
side of the LCD monitor, this button locks the normal exposure, or the flash
exposure (if the flash is enabled) in any Record mode. In Playback mode (and
Quick Review mode), this button calls up the single-item erase menu.
Function Button: Below the * button, this button displays a set of menus
on the LCD monitor. Icons for each submenu line the left side of the display,
and item choices appear along the bottom of the LCD display. The following menu
options are available:
- ISO: Sets the camera's sensitivity to Auto, 50, 100, 200, or 400 ISO equivalents.
- Effect: Cancels special effects, or enables Vivid Color, Neutral Color, Low Sharpening, Sepia, Black-and-White, or Custom Effect modes. Pressing the Set button with the Custom setting adjusts Contrast, Saturation, and Sharpness.
- Bracketing: Enables Auto Exposure Bracketing or Auto Focus Bracketing. Pressing the Set button here lets you select the exposure or focus variation for the selected series.
- Flash +/-: Adjusts the overall power of the built-in flash.
- Quality: Sets the JPEG compression level to Superfine, Fine, and Normal.
- Resolution: Sets image resolution to L (2,592 x 1,944 pixels), M1 (1,600 x 1,200 pixels), M2 (1,024 x 768 pixels), S (640 x 480 pixels), or RAW.
In addition to its other functions, pressing the FUNC button during the review interval after a shot has been taken offers you the option of saving the just-captured image in the RAW file format, rather than the usual JPEG.
Display Button: Directly below the Function button, this button controls
the image and information displays on the LCD monitor. In Record mode, this
button turns on the image display with the first press, activates the information
display with the second press, and cancels both with the third press. In Playback
mode, the button cycles through the captured image information displays, including
a detailed information display with a histogram.
Macro / Jump Button: The first button in a series on the left side of the
viewfinder, this button accesses the Macro function when the camera is in Record
mode. In Replay mode, it pulls up the "jump bar." When the jump bar
is displayed, the right and left arrow buttons jump nine images forward or nine
images backward, rather than the usual single-image movement.
Metering Button: To the left of the Macro / Jump button, this control selects
between Evaluative, Center-Weighted Averaging, or Spot metering modes when the
camera is in Record mode.
Flash / Index Display Button: Positioned in the very top left corner of
the back panel, this button cycles through the three primary flash modes of
off, on (forced or fill-flash) and automatic. (The sub-options for the flash
of red-eye reduction and sync are controlled via the Record menu.) In Playback
mode, this button displays up to nine images at a time, in a thumbnail index
format, on the LCD screen.
Diopter Adjustment Dial: Next to the circular viewfinder eyepiece, this
notched dial adjusts the optical viewfinder's focus to accommodate eyeglass
wearers.
Follow Imaging Resource: