Nikon P900 Samples

Still Life

This is our new "Still Life" test target. We're combining some of the elements from previous shots (DaveBox and Res Chart) into this and the "Multi Target" shot below, plus added a number of elements that are very revealing of various camera characteristics and foibles.

Here's what to look for in this target:

• Tone-on-tone detail & noise suppression: The cloth swatches in the pinwheel were chosen because they show a lot of tone-on-tone detail, across a broad range of colors. This is just the sort of detail that noise suppression processing tends to flatten out. If you look at the detail in these swatches as the ISO increases, you'll see just where different cameras start to lose subtle detail. -- The white and tan swatches and the dark swatches tend to be particularly revealing of this. The label of the vinegar bottle (second from the right) is another great place to look for lost detail from noise suppression, as the image of the person at the top of the label is actually a depiction of a mosaic. The dark colors in the background and in the figure's clothes contain detail that's very quickly lost when a camera's noise suppression system kicks in. Cameras with really high-quality, low-noise sensors that require little noise suppression will be able to hold onto the detail in these areas, many others will show only a uniform swath of smudged color.
  
  Another place where you'll quickly see the effects of over-aggressive noise suppression is in the white salt grains of the salt grinder in lower left. Cameras are often more conservative about suppressing noise in highlight areas (because our eyes tend to see less of it there), but many cameras seem to have a hard time holding onto the subtle shadings that distinguish the salt grains from each other, particularly at higher ISO levels.
  
  
• Fine Detail: You'll find a lot of fine detail in the label of the beer bottle on the right, in its fine cursive text, but the other bottle labels hold a lot of fine detail as well. Fine text is often a good visual indicator of resolution, because our brains have an excellent idea of what the text should look like, so are very quick to notice even minor loss of detail.
  
  For really fine detail, look to the circular scale/calculator on the right side of the scene. Some of the fine lines there are extremely fine indeed. Looking at results from many different cameras with this target, we found that camera noise-suppression systems often confuse the fine lines with image noise, and so flatten them out. There's also a nice range of fine text sizes in this chart as well, once again great visual cues for resolution and detail.
  
  
• Highlight Detail: Three elements in this scene show off (or show up) a camera's ability to hold onto highlight detail. As mentioned above, the salt grains (and reflections of the studio lights) in the salt mill are examples of fairly subtle highlight detail that cameras' anti-noise processing sometimes obliterate. The folded white cloth under the mug on the right side of the frame likewise shows a lot of white-on-white detail that is easy to lose, particularly if a camera's tone curve is too contrasty. As it turns out though, the most sensitive test of a camera's highlight abilities seems to be the hank of white embroidery thread in the upper right corner. These fibers are unusually bright and reflective, so its easy for a camera to blow out detail in them.
  
  
• Shadow Detail: Several elements of this subject are useful for evaluating shadow detail, particularly the black mug and the pieces of folded black velvet, both under and inside the mug. The bottoms of the beer bottles also provide some gradations of deep shadow, and the clump of peppers in the bottom of the pepper oil bottle had a fair bit of detail that's far down at the shadow end of the tone curve.
  
  We were actually surprised when we constructed this scene just how dark the velvet and sides of the beer bottles ended up being. Even with the bright studio lights shining directly on it, the velvet in particular stays way, way down at the shadow end of the tone curve. With most cameras and on most monitors, the velvet will simply appear as an unrelieved swatch of black. To see whether it contains deep detail or not, in most cases you'll have to open the file in an image editor and boost the brightness dramatically, to bring the detail up into a visible range.
  
  
• Preservation of "Shape" in Strong Colors: As you approach the extremes of a camera's color gamut (its range of recordable colors), it becomes more and more difficult for the camera to show fine gradations of tone, because one or more of the RGB color channels are close to saturation. It's not uncommon to see a brightly colored piece of clothing or a vibrant flower appear in digicam photos as just a blob of color, because the camera ran up against the limits of its color gamut. The brightly colored embroidery threads in the upper right portion of the Still Life target are good examples of situations where this might happen. Pay particular attention to the bright red and dark blue colors here, as these are both colors near the edge of the typical sRGB color gamut.
  
  
• Color accuracy and white balance: It's pretty small in there, but we've included a mini-MacBeth chart, which displays very carefully controlled color swatches. Our Multi Target (see below) sports a full-sized MacBeth chart, but the one here serves as a good check of color balance and rendition, and is also useful for checking white balance on this particular shot.
  
  
• Image noise and detail vs ISO: As mentioned above, this target contains many elements useful for evaluating detail loss to anti-noise processing. We'll therefore always shoot a full set of test images of this target across each camera's ISO range, for every camera we test. (See below.)

Multi Target

Our new "Multi Target" was first put into use in April, 2009, replacing the earlier "interim" design. This target incorporates a number of elements that combine aspects of the previous Multi target, as well as the previous Viewfinder Accuracy or "VFA" chart. Here's some of what you'll find in this target:

Framing marks: This chart evolved from the earlier Viewfinder Accuracy chart, so one of its major uses is to measure viewfinder accuracy. (See notes in the Viewfinder Accuracy section, at the bottom of this page, for more information on this.)

USAF resolution targets: An important use of this target is in evaluating lens quality, looking how well sharpness holds up as you move from the center to the corners of the frame. The little "USAF" resolution targets arranged at the center, in the corners, and along the diagonals are very useful for making fine judgements about blur, flare and aberrations in the image. We generally show crops of a USAF chip from a corner of the target and from the center, to show how lenses hold sharpness at wide and telephoto focal lengths.

Alignment "bullseyes:" We find these graphics from the graphic arts world (used to align sheets of film in the old film-based prepress days) very useful for seeing chromatic aberration in lenses. The bold black/white elements are good for seeing the colored fringes caused by CA in the corners of the frame.

MacBeth ColorChecker Chart: This is about as common a color standard as you can get these days, very widely available for only mildly exorbitant cost, and quite well controlled in its production. It thus serves as a good basis of comparison between cameras and between test setups. Imatest also understands the MacBeth colors very well, and uses them to produce its color accuracy map that we feature in all our reviews.

MacBeth ColorChecker SG Chart: The ColorChecker SG chart provides a wider range of colors, to give a more detailed map of a camera's color handling. We haven't begun using this chart in the color-accuracy graphs we routinely offer, but expect to do so at some point in the future. In the meantime, we sometimes refer to this chart internally, to get a more complete idea of what a camera's color map looks like.

Log C/F Target: The progressive resolution pattern located just below the center of the target is a Log C/F (logarithmic contrast vs spatial frequency) chart. Digital camera noise reduction routines work by looking at levels of local contrast, flattening-out detail at progressively lower spatial frequencies as the local contrast decreases. (This is very commonly seen in human hair, grass, foliage, and other subjects with subtly-contrasting fine detail.) This chart lets Imatest analyze just how a camera makes the tradeoff between contrast, detail, and image noise.

Color Starbursts: The six circular starburst elements arranged around the target are intended to reveal de-mosaicing artifacts and color-dependent resolution issues. The six starbursts provide examples of each combination of RGB colors intersecting each other. (That is, red, green, and blue against black, plus red against green, green against blue, and blue against red.) Given that the most common sensor RGB color filter pattern (the so-called Bayer) pattern has twice as many green pixels as red or blue, you'll generally see that the green/black starburst shows the best resolution, while the blue/red one shows the worst. The effects of different sensor geometries and color filter array patterns will be revealed here.

Musicians Image: Synthetic test patterns only tell you so much. While we have a lot of pictorial images in our other test targets, we thought it would be useful to include a small "natural" image here as well.

Resolution Target

Part of the impetus in developing the new Multi Target in April 2009 was to switch to using a new 2x target for the resolution measurements, since the original ISO 12233 chart we'd used since the site first began in 1998(!) had become inadequate for testing the highest-resolution cameras. We'd for quite some time had a "homemade" 2x target, employing a shrunk version of the ISO 12233 chart, shot at 1/2 size. The resolution numbers on that chart all needed to be doubled to convert to the actual values, though, so we decided to go with a commercial 2x target to eliminate possible confusion on the part of our readers. Numbers on this new 2x resolution chart now read directly in hundreds of lines/picture height. (Because almost all of the area of this new resolution chart is now meaningful for resolution measurements, there was no longer space on it to overlay the MacBeth and other color targets on our prior Multi chart; hence the simultaneous change in our Multi target.)

This shot duplicates indoor shooting conditions in most US homes, with fairly bright incandescent room lighting. The challenge here is for the camera's flash to blend naturally with the room lighting, and produce good, neutral color overall. - Some cameras will be overly affected by the room lighting, even with their flash enabled, and the result will be a strong orange cast. Another common failing is for the highlights from the flash to take on an unnatural bluish cast.

Finally, exposure is important here, and frequently a tough challenge for the cameras. The model's white shirt is central in the scene, reflecting a lot of the light from the flash right back at the camera. As a result, most cameras underexpose this shot, and require some positive exposure compensation to produce a good result. - And that's an important consideration in itself: Does the camera even permit adjustment of its flash exposures? Many do not. These photos are a tough exposure challenge, if they come out OK, the camera in question can probably be coaxed into delivering a good flash exposure of any subject within its range.

Note too, that the normal flash shot (as opposed to the slow sync one, if the camera offers that feature) will be sharply rendered, any subject or camera movement frozen by the quick pop of the flash. That makes this shot a good one to look for the effect of over-aggressive noise suppression in the model's hair.

To view the exposure series from zero to +1.0 EV in the normal flash mode, see files P900INBFP0.HTM through P900INBFP3.HTM on the thumbnail index page.

To view the same series in the Slow-Sync flash mode, see files P900INBFSP0.HTM through P900INBFSP3.HTM on the thumbnail index page.

The incandescent lighting used in most US homes actually has a very strong yellow color to it. Our eyes have an amazing ability to ignore color casts like this, something digital cameras struggle to emulate.

The incandescent lighting used for this shot is thus not only very common here in the US, but also very difficult for most digital cameras to deal with. While we probably want a little yellow color to remain in the image (to convey some of the mood of the original scene), too much will look unnatural and distort colors.

Most cameras' auto white balance systems have a great deal of difficulty with this shot, but many incandescent white balance settings struggle as well. (It seems that many cameras' incandescent settings are actually calibrated to the tungsten lighting used in professional studio systems, which isn't nearly as warm-toned as typical household lighting.)

If you intend to do much shooting indoors after dark, pay careful attention to this test, as cameras vary widely in this regard.

To view the entire exposure series from zero to +1.0 EV, see files P900INBMP0.HTM through P900INBMP3.HTM on the thumbnail index page.

ISO Series
"ISO equivalent" refers to a camera's light sensitivity. ISO 200 represents twice the sensitivity of ISO 100, meaning that you can use a shutter speed that's twice as fast. Higher ISO settings are often required to get any picture at all when shooting after dark, but even in full daylight, using a higher ISO can help you freeze fast action. The problem is, increasing a digital camera's ISO also increases image noise. In practical terms, this means that higher-ISO images often can't be used to produce prints as large as lower-ISO ones. The tricky thing here is that high-ISO images often look much different when printed at various sizes than they do when viewed on-screen. In particular, for any level of image noise, you'll often find that while noise is quite evident at larger print sizes, as you reduce the size of the prints, there will come a point where it suddenly ceases to be an issue. We routinely print high-ISO photos from the cameras we test on our studio printer (currently a Canon i9900) at a range of sizes, and report our findings. If you're interested in investigating the effect of image noise for yourself, don't judge cameras' performance by how their images look on your CRT/LCD, viewed pixel-for-pixel. Rather, download the test shots linked in the table below and output them on your own printer, so you can see how prints of various sizes will actually look.

One additional note about this particular test series though: Because these images are shot under household incandescent lighting, the camera has to boost its blue-channel signal quite a bit to get back to a neutral color balance. Since the blue channel is generally the one with the most noise, this makes this shot a real acid test of noise performance. Noise levels in high-ISO shots taken under daylight conditions usually won't show as much noise. (See the "Far Field" test for examples of high ISO shots captured in daylight.)

Like several of our tests, these images are actually photos of a high-resolution poster, shot under studio lighting. The shots for this camera were captured with our third-generation House poster, which was assembled from 45 separate 11-megapixel images, shot with a very high-quality lens, and then stitched together into a single image. The resulting image amounts to about 450 very high-quality megapixels. This should have sufficient detail to comfortably challenge cameras up to at least 80-100 megapixels. (And even with higher-resolution cameras, we believe that the camera lenses themselves would be more likely to limit resolution than would the detail in the poster.)

Why did we choose to shoot a picture of a picture? The idea was to show a typical subject (a house and surrounding foliage) in a way that would be absolutely consistent from camera to camera. Any outdoor subject is going to vary considerably from day to day, as the lighting changes with the weather, atmospheric conditions, and season. Shooting a poster lets us compare images from cameras shot weeks, months, or even years apart, with the sure knowledge that nothing has changed from one shot to another.

Things to look for here are fine detail, as seen in the foliage and tree limbs against the sky, sharpness in the corners, and the preservation of subtle detail in the shaded brick patterns. - Many cameras with overactive noise suppression severely blur the brick patterns that are in shadow.

Lens Zoom Range

Simply reading "83x zoom range" doesn't do a lot to help you visualize what that means. It also says nothing regarding just how wide the wide-angle end of that range is. To give you an idea of exactly what each camera's zoom lens does, we shoot this series of images, showing results at maximum wide angle, maximum telephoto, and telephoto with "digital zoom" enabled. (If supported. Note of course though, that so-called "digital zoom" just crops out and enlarges the central pixels of the image, achieving increased size at the cost of reduced resolution.)

Because most of its various elements are now contained or represented in the combination of the Still Life and Multi Target shots, we no longer routinely shoot the Davebox by itself, as would normally appear in this space. (We do however, still use it for our low light test below.)

Many are interested in close-up or "macro" photography. This test shows the best results we could obtain using each camera's macro mode. What to look for:

• Minimum Macro Area: What's the smallest area that the camera can photograph? - We calculate this and report on it in the Test Results section of each review.
• Softness in corners?: The images from most digital cameras get fairly soft when shooting in macro mode. Some are better than others though, you can use the texture of the paper fibers or the details in the dollar bill to compare corner sharpness between models.
• Flash performance in macro mode?: Macro mode flash performance varies widely between cameras. Some can't throttle down the flash enough, others throttle down enough, but have very uneven lighting, while others have lenses that project into the path of the flash, casting strong shadows. The Macro with Flash shot here will show you what to expect.
  
  
  
  

Manufacturer-Specified Flash Range

Lately, many manufacturers specify flash range with the camera set to Auto mode, in which the camera is free to boost its ISO setting to help increase the flash range. This does increase the range, but it's easy to have too much of a good thing: Too high an ISO can leave you with too much image noise. The variable ISO setting also means that there isn't an easy way to compare the range with the fixed-ISO shots in our standard flash range series. So now, we also test the flash under the manufacturer-specified conditions (whatever they may be, but frequently with the camera set to Auto mode), and the look at both how brightly the scene is lit, and how much image noise is present in the resulting images.

Flash range for SLRs will vary with the lens used (depending on the maximum aperture), so their flash range is commonly expressed as a Guide Number, or GN for short. The guide number is a distance, in either feet or meters, at a given ISO. To find the maximum flash range at a given aperture, just divide the guide number by the aperture. For instance, a guide number of 56 feet would translate to a range of 10 feet with a lens set to an aperture of f/5.6. The range would be twice that if you had an f/2.8 lens (56/2.8 = 20).

Flash Uniformity

The flash units on many digital cameras don't illuminate the scene very evenly, especially at wide angle focal lengths, so the photos here shows how uniform the flash coverage is. As noted earlier, this test uses the same target as our flash range test, but for the uniformity tests, we take care to frame the target the same from camera to camera. The concentric circles on the target mark distances 25%, 50%, and 75% of the way from the center to the corners. (Approximate, they roughly split the difference between the 4:3 and 3:2 aspect ratios.)

Viewfinder Accuracy

Viewfinder accuracy is an important parameter, especially for shots where framing is critical. The optical viewfinders on most digital cameras match the (poor) accuracy of those on film cameras, typically showing only about 85% of the actual final frame area. It's likely that this is a deliberate design choice by the camera engineers, to help avoid users accidentally cutting off the heads of their subjects. We disagree with this approach, or at least feel that it should be mitigated a bit, perhaps by increasing the accuracy to 90 to 95%.

Unlike the optical viewfinders, the LCD viewfinders on most digital cameras tend to be quite accurate. There are exceptions though, so this test is still important.

Things to look for on this test chart are:

• Optical/Electronic viewfinder accuracy: When we shoot this target in the studio, we line things up so the center of the bright red outline on the target is just visible at the edges of the viewfinder frame. The resulting photo then very directly shows how accurate the viewfinder is. The fine black lines mark progressive increments of 1% of increased or decreased frame area. The bold black lines mark 5% increments. The lines let you get an approximate idea of frame accuracy visually, but we measure the actual pixel dimensions to derive the accuracy numbers we report in our reviews.
• LCD monitor accuracy: This is the same test, but framed with the LCD monitor instead of the optical viewfinder. As mentioned above, LCD monitors are usually more accurate than optical viewfinders, especially in point & shoot digicams.